Item Description
Time relay with accuracy from 3 to 750 seconds.
Dimensions(plate) - 35mm/18mm/12mm
Dimensions( with box) - 40mm/17mm/21mm
Direct output: 12V/1А
Wired with 10 cm wires:
Red - positive 12V+
Black - Negative 12V-
White - Out 12V+
Blue - Out 12V-
Orange - activating 12V+ input
Power: + , - Have protection against reverse supply voltage.
Power supply - 12V DC
Time is adjusted by trimmer
Timer don’t have power consumption when it is in standby mode
Principe of work:
When power is on, the timer wait for filing a 12V+ pulse at activating input. When it is received - timer is
activated and keep that position, until end of set time.
By filing new pulse - cycle repeat.
Timer can be used for delay off car Led lights:
- orange wire is wired to contact switch
- Feeding must be permanent +(red) and -(black) comes from car battery, trough 1A fuse
- White wire positive- to LED light
- Blue wire -negative - to LED light
When contact switch is on – it will provide 12V+ to the timer and the lights will cone on. When contact switch is turn off – the timer will start countdown and lights will stay on for the set time ( up to 750s). Then it will go off.
Please note – if power consumption of the lights is more than 1A, must be placed separate powerful relay at the place of bulb at the schematic, to avoid damage of the timer.
Package contents:
1. Time Relay
2. Instruction for use and wiring diagram
